Samsung Washing Machine Repair Dubai

Samsung Washing Machine Repair

  • Fast & Reliable Service in Dubai
  • Same Day Service
  • Largest Dubai Coverage
  • Fully Equipped Team
  • 06 Months Money Back Guaranty
Contact me

Samsung Washing Machine Repair Dubai

When you use our same or next-day service, you can take advantage of our fast and reliable repairs. We operate nationwide and work on many major brands, including Samsung, Miele, Indesit, and Hotpoint.

Because our experts are well-trained and have all of the tools they need, they can carry out most repairs in your home or business. Our quick and efficient service will have your Samsung appliances up and running in no time.

We can help with both your domestic and commercial repair needs.

Repair Network has all of the right technicians for any job, from a faulty Samsung dishwasher in your restaurant to a malfunctioning Samsung fridge in your home. We work with property agents running occupied homes, as well as landlords taking care of rental properties. We can take on any job, simple or complex, and offer you a quick response, timely service, and affordable prices for any of your Samsung appliance repair needs.

That’s not all. You’ll also get the reassurance of our one-year guarantee and a final bill that won’t surprise you with any hidden costs. Our technicians only use the best brand-approved parts, giving you peace of mind with your repairs.

Samsung Washing Machine Faults

Washing machines are complicated pieces of equipment, and there’s plenty that can go wrong with them. If you’re trying to figure out what the fault with your Samsung washing machine is, here are some of the most common fault codes:
If any of these Samsung error codes are being displayed on your washing machine, get in touch with us for a quick and effective Samsung washing machine repair.
Error CodeErrorPossible Cause
1E
Water level sensor IssueSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program
3E

3E1

3E2

3E3

3E4
Motor defectSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new program.

E4Water supply error. The appliance is not detecting that the unit is filling with water.Check water supply is turned on and that there is adequate water pressure (min:0.5bar, max: 8bar).



4E1

4E2
Water temperature issueCheck water hose is connected to a cold supply and not a hot supply. Cold water is usually indicated by a blue tap.
5ECheck drainage pump filter for blockages (e.g. lint, coins hair, clips)

• Check drain hose and waste connection for kinks and blockages.

Then select a spin cycle to drain the remaining water in the appliance.
6FUnknown: this is not an error code. Contact us about this.Please call the customer support team.

6E
Water heater not functioningPlease call the customer support team.
8EOver current errorSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.


9E1
Power errorSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
9E2Power errorSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
AESignal communication error between Main PCB and Sub PCBSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.

bE
Motor issueSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
bE1Power button issueButton held in too long. Check whether any of the buttons are sticking or are stuck in. Disconnect appliance from mains and clean the buttons with a lightly dampened cloth.
B2/bE2Control button issueButton held in too long. Check whether any of the buttons are sticking or are stuck in. Disconnect appliance from mains and clean the buttons with a lightly dampened cloth.
BE3Button defectivePlease call the customer support team.


CE
Water cool down issueCheck water hose is connected to a cold supply and not a hot supply. Cold water is usually indicated by a blue tap.


dE

dE1
Door issueCheck that the door is closed fully.

• Check nothing is trapping in the door.

• Check unit is not overloaded.
dE2On/Off switch errorButton is being operated continuously. Please disconnect appliance from mains wait 5 minutes and then try again.
FEFan errorPlease call the customer support team.
H1
HE
Water temperature issuePlease call the customer support team.
HE1Please call the customer support team.
HE2Dryer heater not functioningPlease call the customer support team.
HE3Steam function does not operate normallyPlease call the customer support team.
HOTAppliance too hothis is not a fault; appliance fan will continue to run until the appliance is cool enough for the washing to be removed (55°C). Then the door will unlock. – This prevents heater faults.
LE
LE1
Natural drain/Water leak – Low water level detected during cycle.https://www.samsung.com/ae/support/home-appliances/washing-machine-what-does-the-error-code-means-and-how-to-fix-it/
OE
OF
Overflow errorToo much washing powder/liquid may have been added. Switch off the power to the appliance, wait 30 seconds then Switch the power supply back on. The drain pump should operate to drain the washing machine.
t1
ee2/t2

tSt
Appliance in test modeSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
SUD (sometimes misread as 5UD)This occurs when too much foam is detected and is displayed whilst foaming is being removed.This is not a fault.

• The appliance will usually cure this fault on its own, however if it does not you will need to run either an “Eco drum clean” cycle (some models) or a 90°C cotton cycle with no detergent or washing load.

• To prevent this from happening please reduce the quantity of detergent used.
tEECSwitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
tE1

tE2

tE3
Temperature sensor errorPlease call the customer support team.
UCExcessive fluctuation in the supply voltagewitch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.




UE
Unbalanced error – The load in the drum is unbalanced.his is not a fault. The appliance is detecting an unbalanced load and is stopping the spin for safety reasons.

• To help prevent this from occurring please redistribute washing by adding or removing items to ensure a more balance load.

• Single large/heavy items such as bath mats or large towels are unlikely to spin on their own so please add 2/3 additional towels and put on another spin cycle.
E23The washing machine is leaking or there is water in the base plate.Find out more about What to do if your washing machine leaks.
If your detergent box is leaking, Click here to find out more.
 
Scroll to Top
× Click me for Repair